Skip to content
Free shipping over $75 Cart · 0 Shop the Flag Collection

Food contact testing for EU and US market entry

By admin Weaselballs Field Notes

admin

About the author · Boulder-based pacer & gear tester

The short answer

Entering the EU and the US with food-contact products means satisfying two different compliance logics with a single test program. The EU route runs through the framework regulation and material-specific measures, documented in a Declaration of Compliance, while the US route runs through FDA food-contact requirements tied to specific substances and conditions of use. A well-designed plan samples once, tests against both sets of limits where they overlap, and files the paperwork each market expects. This guide compares the two systems and shows how importers sequence the work without duplicating cost.

Key takeaways

  1. EU market entry centers on the framework regulation, material-specific measures, and a Declaration of Compliance that accompanies the finished article.
  2. US market entry centers on FDA food-contact requirements, including the applicable regulation or effective notification for each substance and use.
  3. Both systems operate as technical requirements on traded goods, a subject addressed by the global framework on technical barriers to trade. [1]
  4. Test reports carry the most weight when issued by a laboratory working under recognized accreditation arrangements. [2]
  5. Designing one sampling and documentation plan around the stricter rule wherever the two systems overlap avoids paying for the same evidence twice.

Many importers discover food contact rules only when a shipment is already on the water. A buyer asks for a Declaration of Compliance, a marketplace requests FDA documentation, and suddenly the factory has to prove something it never measured. Planning the test program before mass production avoids that scramble and keeps both market doors open.

The European Union and the United States both protect consumers from substances that migrate out of packaging and tableware, but they organize the obligation differently. The EU builds on a general framework regulation with material-specific measures beneath it, while the US builds on FDA food-contact requirements organized by substance, use, and regulation. Understanding that structural difference is what lets one test plan serve two markets.

This guide walks through each route in plain terms: what the EU expects, what the US expects, where the two overlap, and how to sequence sampling, laboratory work, and paperwork so the evidence collected once can be used twice.

The EU logic: framework rules, specific measures, and declarations

The EU system starts with Framework Regulation (EC) No 1935/2004, which sets general principles for all materials intended to contact food: they must not transfer constituents in quantities that endanger health or unacceptably change the food. Beneath that umbrella sit material-specific measures, the best known being the plastics regulation (EU) No 10/2011 with its migration limits and authorized-substance list, alongside instruments such as the ceramics directive with its lead and cadmium limits. Good manufacturing practice for these materials is covered by Regulation (EC) 2023/2006, which is why auditors ask about process controls and not only laboratory numbers.

Illustration: The EU logic Decorative illustration for the section "The EU logic"; visual only, carries no data.

For importers, the visible output of this system is the Declaration of Compliance. It identifies the finished article, states the rules it complies with, names any restrictions on use, and traces back to supporting test evidence. Enforcement authorities and business customers treat this document as the compliance story of the goods, so every statement in it should map to an actual report or a verified supplier declaration. A declaration that merely repeats a factory assurance without test backing is the single most common weakness found during EU-side checks.

The practical consequence is sequencing: material composition must be fixed before testing, testing must be finished before the declaration is signed, and the declaration must exist before the goods are placed on the market. Importers who reverse this order, testing retail samples after arrival, often find that the tested article no longer matches what the factory is producing. Locking composition early is therefore a commercial decision as much as a regulatory one.

The US logic: FDA requirements and how clearance works

The US system organizes food-contact clearance around substances and their conditions of use under FDA rules, principally in Title 21 of the Code of Federal Regulations. Individual regulations authorize specific substances for defined applications, and where no regulation covers a new use, the Food Contact Notification program provides a route for the manufacturer or supplier to obtain clearance for that specific application. Supporting concepts such as prior sanctions and generally recognized determinations appear in older files, but new products normally trace to a regulation or an effective notification.

What the importer holds at the end is a compliance file rather than a single EU-style declaration: the identity of each food-contact substance, the authorizing regulation or notification, the applicable limitations, and test or calculation evidence showing the use stays within them. Customers and distributors in the US habitually ask for this package during vendor qualification, and experienced buyers assemble it before the first purchase order rather than after a question arrives.

A frequent misunderstanding is that passing EU migration testing automatically satisfies FDA expectations. The two systems use different simulants, conditions, and authorization logic, so results do not transfer one to one. That is exactly why combined test planning matters: the laboratory can run both protocols on shared samples, but each market still gets its own verdict against its own rules.

EU and US expectations side by side

Decision pointEU routeUS route
Legal anchorFramework Regulation 1935/2004 plus material-specific measuresFDA requirements in 21 CFR plus effective notifications
Substance controlAuthorized lists and migration limits per material measureAuthorization per substance and condition of use
Paperwork with goodsDeclaration of Compliance for the finished articleCompliance file with regulation or notification references
Process controlGMP under Regulation 2023/2006Supplier controls and change management
Retest triggerComposition, supplier, process, or use changeComposition, supplier, process, or use change
Testing roleMigration and composition tests against EU limitsExtraction and composition evidence against FDA limits
Illustration: EU and US expectations side by Decorative illustration for the section "EU and US expectations side by"; visual only, carries no data.

Building one test plan for both markets

Sampling and simulant choices that cover both sides

Combined testing starts with combined sampling: sealed specimens taken from finished production, identified by lot and date, with retained spares for retest. The laboratory then maps each material against both protocols, selecting simulants, temperatures, and contact times that satisfy the stricter side wherever the protocols overlap. Many importers coordinate this dual-market scoping with UTS Inspection UTS Inspection before production locks, so the laboratory matrix matches both destinations from the first production lot rather than being patched together afterward.

Technical requirements of this kind sit squarely in the territory of the global trade framework on technical barriers, which deals with how regulations and conformity procedures affect traded goods. [1] For the buyer, the takeaway is procedural: keep the sampling record, the protocol reference, and both verdicts in one file, because either market may ask how a single specimen set produced two compliance answers.

Documentation that satisfies both sides

Paperwork discipline decides whether the laboratory spend pays off. The EU declaration and the US compliance file draw on the same underlying evidence, so file them together with cross-references: each declaration statement should point to the report page or supplier document behind it. Accreditation evidence strengthens the whole package, since buyers and authorities give more weight to reports from laboratories operating under recognized accreditation, a system explained through the international laboratory accreditation network. [2]

Finally, connect testing to purchasing. Write into the supplier agreement that composition, raw-material source, and process changes require written approval and trigger a testing review. Without that clause, a quiet resin substitution can silently invalidate both the EU declaration and the US file, and the next laboratory round becomes an emergency instead of a routine renewal.

Sequence the work in this order: fix composition, confirm the EU measure and FDA basis per material, sample finished production, run the combined protocol, then sign the declaration and file the US documentation. Skipping the first step is the most expensive mistake, because every later correction repeats the full cycle.

Sources

  1. WTO: Agreement on Technical Barriers to Trade —— WTO portal for the TBT Agreement covering technical regulations, standards and conformity assessment.
  2. ILAC: International Laboratory Accreditation Cooperation —— ILAC homepage describing the international cooperation on laboratory and inspection body accreditation.

Frequently asked questions

How do I decide which tests to order when selling in both the EU and the US?

Start from the destination market, not the material. For the EU, identify the framework regulation plus any material-specific measure such as the plastics regulation, and confirm what the Declaration of Compliance must state. For the US, identify the applicable FDA regulation or effective notification for the same substance and use conditions. Where the two lists differ, test to the stricter condition so one report package serves both filings.

What is a Declaration of Compliance and who issues it?

It is the written statement, issued by the business operator, that the finished food-contact article complies with the applicable EU rules. It identifies the article, the materials, the compliance basis, and any use restrictions such as temperature or food-type limits. Downstream customers and enforcement authorities rely on it, so it must match the actual test results rather than restating a supplier promise.

Can one round of laboratory testing support both EU and US filings?

Yes, when the sampling, simulants, and use conditions are designed to satisfy both frameworks at once. The laboratory still reports each result against each applicable limit, so the two compliance stories stay separate even though the specimens are shared. The saving comes from avoiding a second sampling round and a second production interruption. Confirm with the laboratory before sampling that the combined protocol is acceptable to both routes.

When must testing be repeated after the first market entry?

Change of raw material, change of supplier, change of formulation or process, and any new use condition such as hotter filling or longer storage. Regulatory updates on either side can also force a review, since limits and authorized substances evolve. A practical rule is to tie re-verification to your change-control log: any entry affecting composition or use triggers a testing decision before the next shipment.

Trail Gear Notes Ultralight

Light your line. Go where the maps run out.

Trail-tested ultralight flags and reflective markers, hand-painted in Boulder and shipped within 72 hours.

Shop the Flag Collection